Wind Power Cables


These cables are used for transmitting power from the generator mounted in the nacelle of the wind tower to base station. These are flexible cables made of special elastomeric compounds, so as to meet the torsional stresses exerted on the cable due to rotation of the nacelle in relation to wind direction.


Voltage Grade – 600 V / 1100 V

Conductor – Flexible class-5 tinned or bare copper conductors, made to IEC-60228/IS-8130

Range (single core) – 10 Sq mm to 300 Sq mm

Insulation – EPR – in conformance to IEC-60502/ IS-6380

Sheath – Special elastomer compound with Oil, Fire, Hydrolysis and Torsion Resistant properties. (Zero halogen sheath available on request)


Maximum conductor temperature (continuous) – + 90 Deg C

Short circuit temperature(max) for up to 5 seconds – + 250 Deg C

Maximum permissible tensile load on cable – 15 N/mm2

Torsion angle – ± 100° per meter

Minimum bending radius – 10 D

Control & Instrumentation Cables These Cables are used in Wind Energy applications such as rotor blade pitch control, Yaw control, Top box, Anemometer feed back, Remote data logging etc. Construction of Cables shall be as per Customers’ requirement and conforming to various National/International Standards.

Request For More Wind Power Cable